Python/Program Flow and Logicals

Preliminaries

One important thing to understand when programming in Python is that correct indenting of code is essential. The Python programming language was designed with readability in mind, and as a result forces you to indent code blocks, e.g.

• while and for loops
• if, elif, else constructs
• functions

The indent for each block must be the same, the Python programming language also requires you to mark the start of a block with a colon. So where MATLAB used end to mark the end of a block of code, Python uses a change in indent. Other than this, simple Python programmes aren't dissimilar to those in MATLAB.

For example, the simplest case of an if conditional statement in Python would look something like this

if condition:
   statement1
   statement2
   ...

where the code in lines statement1, statement2, ... is executed only if condition is True. Sharp sighted readers might spot another difference to MATLAB, in Python there is no need to add a semicolon at the end of a line to suppress output.

The boolean condition can be built up using relational and logical operators. Relational operators in Python are similar to those in MATLAB, e.g. == tests for equality, > and >= test for greater than and greater than or equal to respectively. The main difference is that!= tests for inequality in Python, compared to ~= in MATLAB. Relational operators return boolean values of either True or False.

And Python's logical operators are and, or and not, which are hopefully self explanatory.

The if functionality can be expanded using else as follows

if condition:
   statement1
   statement2
   ...
else:
   statement1a
   statement2a
   ...

where statement1, statement2, ... is executed if condition is True, and statement1a, statement2a, ... is executed if condition is False. Note that the code block after the else starts with a colon, and this code block is also indented.

Finally, the most general form of this programming construct introduces the elif keyword (in contrast to elseif in MATLAB) to give

if condition1:
   statement1
   statement2
   ...
elif condition2:
   statement1a
   statement2a
   ...
   ...
   ...
elif conditionN:
   statement1b
   statement2b
   ...
else:
   statement1c
   statement2c
   ...

Like MATLAB, Python has while and for loops. Unconditional for loops iterate over a list of values

for CounterVariable in ListOfValues:
   statement1
   statement2
   ...

and repeat for as many times as there are elements in the ListOfValues, each time assigning the next element in the list to the CounterVariable. The code block associated with the loop is identified by a colon and indenting as described above.

There are various ways of creating a list in Python. The range function can be used to create sequences of numbers with a defined start, stop and step value. For example to create a list containing the four values 1, 4, 7 and 10, i.e. a sequence starting at 1 with steps of 3, use range(1,11,3). Note that the stop value passed to the range function is not included in the list, i.e. range(1,10,3) would produce only the three numbers 1, 4 & 7. We can verify this at the Python command prompt, i.e.

>>> range(1,11,3)
[1, 4, 7, 10]
>>> range(1,10,3)
[1, 4, 7]

Python lists can also be created from a sequence of values separated by commas within square brackets, e.g. MyList = [1.0, "hello", 1] creates a list called MyList containing 3 values, a floating point number 1.0, the string hello and an integer 1. This example demonstrates that Python lists are general purpose containers, and that elements don't have to be of the same class. It is for this reason that lists are best avoided for numerical calculations unless they are relatively simple, as there are much more efficient containers for numbers, i.e. NumPy arrays, which will be introduced in due course.

Conditional while loops are identified with the while keyword, so

while condition:
   statement1
   statement2
   ...

will repeatedly execute the code block for as long as condition is True.

As in MATLAB, Python allows us to break out of for or while loops, or continues with the next iteration of a loop, using break and continue respectively.

for

We now look at the Python equivalents of the MATLAB code discussed in the MATLAB page on Program Flow and Logicals. A description of the mathematics is available on the MATLAB page, for brevity it is not repeated here. In the case when the error terms in e are known in advance, the Python version of the algorithm is:

1. Find length of the list containing the error terms e: T=len(e)
2. Initialize a list y with the same length as vector e: y=[0.0]*T
3. Compute y[0]=phi0+phi1*y0+e[0]. Please remember, we assume that [math]y_0=E(y)=\phi_0/(1-\phi_1)[/math]
4. Compute y[i]=phi0+phi1*y[i-1]+e[i] for [math]i=1[/math]
5. Repeat line 4 for [math]i=2,...,(T-1)[/math]

A simple implementation in Python is

T=len(e)
y=[0.0]*T
y0=phi0/(1-phi1)
y[0]=phi0+phi1*y0+e[0]
for i in range(1,T):
   y[i]=phi0+phi1*y[i-1]+e[i]

and for comparison the MATLAB code is

  T=size(e,1);
  y=zeros(T,1);
  y0=phi0/(1-phi1);
  y(1)=phi0+phi1*y0+e(1);
  for i=2:T
    y(i)=phi0+phi1*y(i-1)+e(i);
  end

One difference to note is Python list and array indexing starts at 0 and uses square brackets, whereas array indices start at 1 in MATLAB. The line y=[0.0]*T preallocates a Python list containing T floating point numbers all set to zero.

if else

As above, a description of the mathematics can be found on the MATLAB page on Program Flow and Logicals. The Python algorithm is now

1. Find length of the list containing the error terms e: T=len(e)
2. Initialize a list y with the same length as e: y=[0.0]*T
3. Check whether abs(phi1)<1. If this statement is true, then y0=phi0/(1-phi1). Else, y0=0. Please remember, we set [math]y_0=E(y_0)[/math].
4. Compute y[0]=phi0+phi1*y0+e[0].
5. Compute y[i]=phi0+phi1*y[i-1]+e[i] for [math]i=1[/math]
6. Repeat line 5 for [math]i=2,...,(T-1)[/math]